These adapters are offered in versions with and without an AR-coated aspheric condenser lens. Each adjustable collimation adapter includes an internal SM2 (2.035"-40) thread adapter so that the LEDs can be easily integrated with Thorlabs' SM2-threaded components, such as our Ø2" lens tubes. Our adjustable collimation adapters can translate a Ø1" (Ø25 mm) or Ø2" (Ø50 mm) lens by up to 11 mm or 20 mm, respectively. Please note that mounted LEDs are not intended for use in household illumination applications. For more details, please see the Stability tab. These mounted LEDs possess good thermal stability properties, eliminating the issue of degradation of optical output power due to increased LED temperature. When controlled by a Thorlabs DC2200, DC4100, or DC4104 LED driver, the data can be used to implement smart safety features. These heat sinks are enclosed in Ø57.0 mm vented plastic housings and include four 4-40 tapped holes on the front for integration with 30 mm cage systems.Įvery LED features an EEPROM chip which stores information about the LED (e.g., current limit, wavelength, forward voltage). A selection of our LEDs are mounted to larger heat sinks, as they generate more heat during operation. LEDs with Ø1.20" heat sinks have the same outer diameter as an SM1 Lens Tube, allowing them to fit inside a 30 mm Cage System. 4-Pin Female Mating Connector for Custom Power Supplies can be Purchased SeparatelyĮach Thorlabs uncollimated, mounted LED consists of a single LED mounted to the end of a heat sink with 6 mm deep, SM1 (1.035"-40) internal threads.Microscope- and SM-Thread-Compatible Collimation Adapters Available.Thermal Properties Optimized for Stable Output Power.Integrated Memory Stores LED Operating Parameters.White, Broadband, and Dual-Peak LEDs Also Available.Wavelengths Ranging from 265 nm to 4300 nm (See LED Quick Links Table to the Right). ![]() To determine the needed collimation adapter for a given LED, see the info icons ( ) below. ![]() See the tables below to determine the appropriate LED driver. ![]() A mounted LED requires an LED driver to run a collimation adapter (optional) collimates the diverging beam emitted by the LED.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |